RCA 21028 Cordless Telephone User Manual


 
10
INSTALLATION
INSTALLATION NOTE: Some cordless telephones operate at frequencies that
may cause or receive interference with nearby TVs and VCRs. To minimize or
prevent such interference, the base of the cordless telephone should not be
placed near or on top of a TV or VCR. If such interference continues, move the
cordless telephone farther away from these appliances. Certain other
communications devices may also use the 2.4 GHz frequency for communication,
and, if not properly set, these devices may interfere with each other and/or your
new telephone. Typical devices that may use the 2.4 GHz frequency for
communication include wireless audio/video senders, wireless computer
networks, multi-handset cordless telephone systems, and some long-range
cordless telephone systems.
Never install telephone wiring during a lightning storm.
Never install telephone jacks in wet locations unless the jack is
specifically designed for wet locations.
Never touch non-insulated telephone wires or terminals, unless the
telephone line has been disconnected at the network interface.
Use caution when installing or modifying telephone lines.
Temporarily disconnect any equipment connected to the phone such as
faxes, other phones, or modems.
INSTALLATION GUIDELINES
Install telephone near both a telephone (modular) jack and an electrical
power outlet.
Avoid sources of noise, such as a window by a busy street, and electrical
noise, such motors, microwave ovens, and fluorescent lighting.
Avoid heat sources, such as heating air ducts, heating appliances,
radiators, and direct sunlight.
Avoid areas of excessive moisture or extremely low temperature.
Avoid dusty locations.
Avoid other cordless telephones or personal computers.