Filter
Top Products
19
3. Press CID/VOL ( or ) button to scroll to ROOM MONITOR.
4. Press MUTE/PROG button and
ROOM MONITOR EXTENSION?
shows
in the display.
5. Press the handset number of the handset being monitored.
6. If handset 1 is the room monitoring initiator, the following displays will
be shown.
Calling handset 1 Called handset 2
NOTE: If handsets have been named, then the name will be displayed on LCD
instead of handset numbers.
NOTE: During the room monitoring, it will emit a beep tone if there are
incoming calls. You may press TALK/END/CALLBACK button to answer the
call and quit the room monitor mode.
NOTE: Press the *EXIT button on the handset to exit the room monitor.
NOTE: After you initiate the room monitor, you can switch to use handset
speakerphone to do the room monitoring by pressing the SPK button on the
initiater handset.
HANDSET SETUP
You may program the following items:
Language, Handset Name, Ringer Tone, Ringer Volume, VIP Melody, Key
Tone ON/OFF, Message Alert, Ring Select, Security Code, Area Code,
Registration, De-Registration and Default Setting.
During programming, you may press the *EXIT button at any time to exit
the menu and go to the sub-menu and keep the previous setting.
ROOM MONITOR
EXTENSION ?
ROOM MONITOR
HANDSET 2
ROOM MONITOR
HANDSET 1