Filter
Top Products
The Integrated Answering Device
40
4. You may continue to listen to the Help
Guidance, or you may select a command from
the following chart. Ô
*For Memo Record and Greeting Message Record
function, the first time you enter the corresponding
command, it starts the Recording function. If you
want to stop the recording, enter the command
again.
5. After all of the Help Guidance prompts have
played, you hear intermittent beeps indicating
that the system is in the command waiting
mode. You may enter another command at this
time from the chart.
6. When you are finished, hang up to exit the
system. The answering system automatically
returns to standby.
Turn on the answering system remotely
If you have forgotten to turn on your answering
system, you can turn it on remotely from any touch-
tone telephone.
1. Call your telephone number.
2. Wait ten rings until the system answers. You
hear a beep.
Command Function
0 then 1 Repeat a Message
0 then 2 Playing Incoming Messages
0 then 3 Skipping a Message
0 then 4 Deleting a Message
0 then 5 Stop Operation
0 then 6 Answering System On
0 then 7 Memo Record/Stop*
0 then 8 Greeting Message Record/Stop*
0 then 9 Answer System Off
1 then 0 Help Guidance
Ô NOTE Ô
The system will only
playback messages for four
minutes and then it returns
to command waiting mode.
To continue playing your
messages, press 0 then 2
again within 15 seconds.
43-3824.FM Page 40 Friday, February 28, 2003 6:50 PM