Filter
Top Products
The Integrated Answering Device
32
You hear “Ring time” and the current ring time
([ ] 2, [ ] 4, [ ] 6, [ ] Toll saver), and it is
displayed on the base. Then you hear the
guidance for setting the ring time.
2. Press
VOL/SEL/ or VOL/SEL/ until the
desired ring time appears.
3. Press
SET/RING to select the new ring time.
You hear a confirmation tone, then the
announcement “Ring time” and the new ring
time is announced. After a few seconds, the
system announces “To set record time, press
menu again”.
Selecting the message record time
You have three record time options. The options “1
minute” or “4 minutes” set the duration for recording
the incoming messages. “
Announce only” answers
the call with the preset greeting or your personal
greeting but prevents the caller from leaving a
message.
1. Press
MENU four times in standby mode.
You hear “Record time” and the current
recording time ([ ] 1 minute, [ ] 4 minutes, [ ]
Announce only, No recording), and it is
displayed on the base. Then you hear the
guidance for setting the record time.
2. Press
VOL/SEL/ or VOL/SEL/ until the
desired time appears.
3. Press
SET/RING to select the new recording
time. You hear a confirmation tone, then the
announcement “Record time” and new
recording time is announced. After a few
seconds, the system announces “To set
message alert, press menu again”.
Announce only feature
43-3824.FM Page 32 Friday, February 28, 2003 6:50 PM