Filter
Top Products
The Integrated Answering Device
36
USING YOUR ANSWERING SYSTEM
The message counter displays the number of
messages stored in memory. If the display flashes,
then there are new messages are waiting for you.
The flashing number represents the number of new
messages, not total messages. This phone is
designed to play your new messages first. After you
play all your new messages, you can then play your
old messages. Ô
Playing your messages
1. Press
PLAY/STOP.
The system announces the number of new and
old messages. The LED displays the number of
new messages, and the number flashes. The
day and time that each message was received
is announced after the message is played. The
message counter displays the number of
current messages stored.
When all new messages have been played,
you hear a confirmation tone and an
announcement “End of messages”. The system
returns to standby.
2. After you have reviewed all of your new
messages, you can play your old messages by
again pressing
PLAY/STOP. Once you have
listened to a new message, it becomes an old
message. The old messages will be played in
the order in which they were received.
Repeating a message
1. Press
PLAY/STOP to review your messages.
The number of stored messages are
announced.
2. After a message has played for a few seconds,
press to replay the message. If you have
several messages, press repeatedly until
you return to the message you want to replay.
Ô NOTE Ô
• When the answering
system is full , is
displayed on the base,
and the system
announces “No
remaining time”. You
should delete some
messages so that the
system can record new
messages.(Refer to
“Deleting a message” on
page 37.)
• To stop playing your
messages, press PLAY/
STOP
again at any time.
43-3824.FM Page 36 Friday, February 28, 2003 6:50 PM