ProForm ID555 Answering Machine User Manual


 
Important 3
1Important
Take time to read this user manual
before you use your phone. It
contains important information and
notes regarding your phone.
1.1 Power requirements
This product requires an electrical
supply of 100-240 volts AC. In
case of power failure, the
communication can be lost.
The Electrical network is classified
as hazardous. The only way to
power down the charger is to
unplug the power supply from the
electrical outlet. Ensure that the
electrical outlet is always easily
accessible.
The voltage on the network is
classified as TNV-3
(Telecommunication Network
Voltages), as defined in the
standard EN 60-950.
Warning
To avoid damage or malfunction:
Do not allow the charging
contacts or the battery to come
into contact with metal objects.
Do not open it as you could be
exposed to high voltages.
Never use any other battery than
the one delivered with the
product or recommended by
Philips: risk of explosion.
Always use the cables provided
with the product.
Use only with provided batteries:
a) TCL, PL-043043, Li-ion
polymer battery, 3.7V 500mAH
b) Mcnair, MC-163-500, Li-ion
polymer battery, 3.7V 500mAH
Use only with provided adaptor:
Base Station
a) Electronic Sales Ltd, IW507,
7.5V 500mA
b) Electronic Sales Ltd, TR5075G,
7.5V 500mA
Charger pod
a) Electonic Sales Ltd, TR1575G,
7.5V 150mA
b) Electonic Sales Ltd, IW157,
7.5V 150mA
1.2 Safety Information
Handsfree activation could
suddenly increase the volume in
the earpiece to a very high level:
make sure the handset is not too
close to your ear.
This equipment is not designed to
make emergency calls when the
power fails. An alternative has to
be made available to allow
emergency calls.
Do not expose the phone to
excessive heat caused by heating
equipment or direct sunlight.
Do not drop your phone or allow
objects to fall on your phone.
Do not use any cleaning agents
containing alcohol, ammonia,
benzene, or abrasives as these may
harm the set.
!
ID555_IFU_GB.book Page 3 Friday, July 18, 2008 2:06 PM