Filter
Top Products
Advanced settings 33
press
m
SELECT
, scroll : to
CHANGE PIN
and press
m
SELECT
.
Enter the current master PIN
when prompted and press
m
OK
to confirm.
• The PIN entered will be shown
as asterisks (*) on the screen.
Enter the new PIN and press
m
OK
.
Enter the new PIN again and
press
m
OK
to confirm PIN
change.
• A validation tone is emitted and
the screen returns to previous
menu.
Note
If you forget your PIN, you will need to
reset your phone to its default settings.
See next section “Reset Unit” for more
details.
8.5 Registration
If you wish to register an additional
handset or if you have inadvertently
unregistered your phone handset and
want to re-register it, follow the
procedure described below. This is the
procedure for registering ID555
handsets.The procedures may vary
according to the handset you want to
register. In this case, please refer to the
manufacturer of the additional handset.
Additional handsets must be
registered to the base unit before you
can use them. Up to 5 handsets can
be registered to one base station.
The master PIN is required before you
can register or unregister handsets.
Note
By default, the master PIN is 0000.
To register your handset
manually:
The Master PIN is required before you
can register or unregister handsets.
Note
By default, the Master PIN is 0000.
On the base station, press and
hold
p for approximately 5
seconds. The base station emits
a beep when it is ready to accept
registration.
On the handset, press
M key,
scroll
: to
ADVANCED SET
and press
m
SELECT
, scroll
: to
REGISTRATION
and
press
m
SELECT
.
Note
If no action is taken on the handset
within 10 seconds, the registration
procedure will be aborted. If this
happens, repeat Step 1.
Enter the Master PIN when
prompted and press
m
OK
to
confirm.
Note
By default, the Master PIN is 0000.
WAITING_ _
is displayed on the
screen.
Note
If no base is found within a certain
period, the handset returns to idle
mode.
2
3
4
1
2
3
4
ID555_IFU_GB.book Page 33 Friday, July 18, 2008 2:06 PM