Filter
Top Products
18 Using your phone
4.2 Answer a call
When the phone rings, press
r key.
• The call is established.
Note
Incoming call has priority over other
events. Whenever there is an
incoming call, other status in progress
such as phone setting, menu
navigation, etc will be aborted.
Danger
When the handset rings during an
incoming call, please do not hold the
handset too close to your ear, as the
volume of the ringing tone may
damage your hearing.
4.2.1 Handsfree answering
When the phone rings, press
v key.
• The handset loudspeaker is
activated.
Danger
Handsfree activation can suddenly
increase the volume in the earpiece
to a very high level. Make sure the
handset is not too close to your ear.
4.3 End a call
To end a conversation, press
e key.
Tip
If
AUTO HANG-UP
mode is activated
(see “Activate/Deactivate Auto
Hang-up” on page 28), you can simply
place the handset back to its base
station to end the call. This feature is
activated by default.
Note
The call duration will be displayed on
the handset screen for about 5
seconds.
ID555_IFU_GB.book Page 18 Friday, July 18, 2008 2:06 PM