Filter
Top Products
Telephone answering machine (TAM) 43
Press
M in idle mode, scroll
: to
ANSWER MACHINE
and
press
m
SELECT
, press
m
SELECT
again to enter
PLAY
menu.
Press
m
SELECT
.
• The first recorded message will
start to play until the last
recorded message.
During message playback, you
can press m to select the
available options (see options
available under “Playback of new
messages via handset” on
page 42).
10.2 Delete all messages
Note
Unread messages will not be deleted.
Warning
Messages deleted cannot be
recovered.
Press
M in idle mode, scroll
: to
ANSWER MACHINE
and
press
m
SELECT
, scroll : to
DELETE ALL
and press
m
SELECT
.
DELETE ALL?
is displayed on the
screen. Press
m
OK
to confirm
deletion of all your messages.
• A validation tone is emitted and
the screen returns to previous
menu.
10.3 Set the Answer mode
There are 2 answer modes available:
Answer only, and Answer & record.
By default, the answer mode is
ANSWER & REC.
, by which your
correspondent can leave a message
on the answering machine.
This can be changed to
ANSWER
ONLY
mode, by which your
correspond cannot leave any
messages on the answering machine.
Press
M in idle mode, scroll
: to
ANSWER MACHINE
and
press
m
SELECT
, scroll : to
ANSWER MODE
and press
m
SELECT
.
Scroll
: to
ANSWER & REC.
or
ANSWER ONLY
and press
m
SELECT
.
• The answer mode is set.
Note
Depending on the answer mode you
have selected, the appropriate default
outgoing message is played once the
answering machine picks up an
incoming call. The language of the
default outgoing message depends on
the country selected in Welcome
mode (see page 12).
10.4 Personalised Outgoing
Message
10.4.1 Record your Personalised
Outgoing Message
This personal outgoing message
replaces the default ones. To revert to
the default outgoing message, simply
delete the personal outgoing message
you have recorded. If you are not
satisfied with the recorded outgoing
1
2
3
!
1
2
1
2
ID555_IFU_GB.book Page 43 Friday, July 18, 2008 2:06 PM