Polycom RSS 2000 IP Phone User Manual


 
Polycom RSS 2000 User’s Guide
66
Dial out and Record through Web
Click Dial out and Record in the function tree on the left of the web page to make a call and initiate recording,
as shown in Figure 4-53 .
Figure 4-53 Make Calls through Web
Enter the IP address for the endpoint to call in the URL field, choose a calling bandwidth, and then click the Dial
button at the bottom of the page to make a call with a rate of 128kbps-1920kbps. After a call is made, RSS 2000
will negotiate capacity with the called site to build a connection in accordance with the negotiated audio/video
protocol.
Note: 1. After the connection is established through web calling, RSS 2000 will initiate recording
directly, without the need of any more selective settings for the endpoint, if recording
resources are available.
2. After the connection is established through web calling, if there no recording
resources are available for the RSS 2000 at the time, it will be disconnected after 10
seconds.
Selection to Record H.239 Duel Video PC Images
If this option is checked, H.239 duel video PC images sent by the endpoint will be recorded when recording is
initiated through web. The rate to record PC image content will be 1 frame/second. When playing back the
recorded archives through web, two windows will pop up showing main channel images and duel video PC
images respectively. See Figure 4-54. The recorded duel video PC images support a resolution of XGA.