Filter
Top Products
Polycom RSS 2000 User’s Guide
23
Play Recording
The recorded archive is saved in a raw code stream file and a WMV file. The raw code stream file can be played
by calling the RSS 2000 from an endpoint. During playing, the RSS 2000 supports up to 10 H.323 connections
for recording if there is no archive recording is in process, or 5 H.323 connections (including H.323 connections
for recording tasks) if there is a archive recording going on.
Note: The recording operation is not available when 5 or more H.323 connections for
playing exist.
Watch Archives with Viewing Rights
You can enter the Play Archive menu by using the endpoint remote control to select Play Archive on the main
menu interface and then select OK. The Play Program menu lists all programs available to the currently
connected endpoints depending on the properties of the recorded program files. If the Viewing Rights properties
of the program files are set to Allow All, or if the properties are set to Group List and your endpoint in connection
belongs to a group in the list, these programs will be displayed in the current Play Program list.
Note: After your endpoint calls and connects to the RSS 2000, you can only see the programs if you have the
viewing rights and if the program uses the video protocols that your endpoint supports. Archives recorded using
the video protocols that your endpoint does not support will not appear in your archive list, even though viewing
rights is available.
Enter PIN Code
You can play the currently selected program by using the endpoint remote control to select a program from the
Play Program list and then press OK. If a archive is set with a PIN code before recording, the RSS 2000 will
provide a voice prompt asking you to enter that PIN code when you play the archive. You type in the PIN code
for the program through DTMF and then press '#' when finish. What you type appears as a line of '*' on the menu
interface. If the PIN code you have entered is correct, you will immediately see the playing image of the program;
otherwise you will hear a voice prompting 'Invalid PIN code, please enter it again.'