Filter
Top Products
Polycom RSS 2000 User’s Guide
13
Fast Recording
Setting the property of the endpoint as Fast Recording at the web client will make it unnecessary to select at the
menu interface at the time when the endpoint is calling the RSS 2000. Single point recording can then start
directly. For information on setting the property of the endpoint as Fast Recording, refer to the relevant content
of Web Management.
Pause Recording
In the recording process, it is possible to pause the recording through the endpoint remote control. When
watching the cyclic screens, you may return to the menu of the recorded archives by pressing any arrow key.
Selecting Pause Recording will stop the recording process. Meanwhile, the option of Pause Recording now
changes to Continue Recording and a voice message "Conference recording paused" given by the system will be
heard, as shown in Figure 2-5. At this time, the streams sent to the RSS 2000 by the endpoint will no longer be
saved.
Figure 2-5 Pause Recording
Continue Recording
Selecting Continue Recording through the endpoint remote control can resume the paused recording. At this
time, you will hear a voice message "Conference recording continues" and see the option changed to Pause
Recording again, as shown in Figure 2-6. In this case, when you play the generated archive after the recording is
completed, you will find that the part of archive played after the pause and before the resumption has not been
recorded.