Polycom 1725-32504-001 Telephone User Manual


 
iii
About This Guide
Thank you for choosing the Polycom® CX300 Desktop Phone which enables a
new era in unified communications currently unavailable with traditional
desktop phones. Connecting a Polycom CX300 phone to a computer running
Microsoft
®
Lync™ 2010 allows you to place and receive telephone calls over
your IP network connection. For more information on what’s new in Microsoft
Lync 2010, refer to
http://www.microsoft.com/communicationsserver/en/us/whats-new.asp
This User Guide provides everything you need to quickly use your new
phone. Verify with your system administrator that the network is prepared for
configuring your Polycom CX300 phone, you are provisioned in Microsoft
Lync 2010, and your network is correctly configured. As well, read the Parts
List and Safety Notices sections in this guide before you set up and use the
Polycom CX300 phone.
Changes to This Guide
The following sections are new for this edition:
Connecting to Microsoft Lync 2010 on page 1-7
Configuring Microsoft Lync 2010 for the Polycom CX300 Desktop Phone
on page 1-7
Switching Where Audio is Played on page 1-10
Switching Where You Receive Audio During Calls on page 2-4
Redirect Calls on page 2-6