Filter
Top Products
User Guide for the Polycom CX300 Desktop Phone
1 - 8
a In the wizard, ensure that the Speaker and Microphone device
options are both set to Polycom CX300 for the Handset or Headset
setup pages. Click Next.
b Ensure that the Speaker/Microphone or Speakerphone device
options are both set to Polycom CX300. (You may need to select
Custom in the top text box to enable you to properly select the speaker
and microphone.) Click Next.
c If you want ringing and other sounds made by your computer to
output from the Polycom CX300 earpiece, select the Polycom CX300 to
be the device for the Sounds setup page. Otherwise ensure that your
PC sound output device is selected.
d Click Finish to exit the wizard.
Changing the Phone Settings
You can modify the volume and text display settings of your phone. These
settings can be accessed while 5=settings is displayed on the splash screen,
which is displayed on the phone at startup. 5=settings is displayed for 10
seconds.
Press the * dial pad key to return to a previous menu or exit phone settings
menu.
This section contains instructions for:
• Volume Key Response Rate
• Call Volume Setting
Note
Contact your system administrator to ensure your account is configured for
Enterprise Voice mode.
Note
If the language setting of Microsoft Lync 2010 is not English, the 5=settings is not
displayed with the splash screen. However, you can still access the phone settings
if you press the 5 dial pad key during the first 10 seconds of the splash screen’s
display.
Warning
Do not disconnect the phone from the computer that is running Microsoft Lync 2010
when making changes to the phone settings. This could result in data corruption.