Filter
Top Products
55
EN
Telephone Answering Machine (TAM)
8. You can then set the answering mode as Answer Only or Answ. & Record, and choose to set your
outgoing message as Predefined or Personalised (special VIP message).
Refer to "Predefined Outgoing Messages" and "Personalised Outgoing Messages" above for the steps to
record and play your outgoing messages for the VIP list.
Delete VIP numbers
1. Press mSELECT to enter the VIP List.
2. The numbers in the VIP list will be displayed.
3. Scroll
: to select an entry and press mSELECT.
4. Scroll
: to Delete and press mSELECT to delete.
Answer On/Off
Turn answering machine On/Off
1. Press m
MENU
, scroll : to Answer Machine and press mSELECT, scroll : to Ans. On/Off and
press
mSELECT.
2. Scroll
: to On or Off and press mSELECT to confirm.
Answering Machine settings
1. Press m
MENU
, scroll : to Answer Machine and press mSELECT, scroll : to Ans. Settings and
press
mSELECT.
Ring delay
This is the number of rings before the answering machine answers and starts playing your greeting message.
You can set the answering machine to start playing your greeting message after 1 to 7 rings or Toll saver. The
default ring delay is 5.
1. Press
m
MENU
, scroll : to Answer Machine and press mSELECT, scroll : to Ans. Settings and
press
mSELECT, press mSELECT to enter Ring delay.
2. Scroll
: to your desired ring delay setting (1 to 7 rings or Toll saver) and press mSELECT to confirm.
Toll saver mode can save you the cost of a long-distance call when you check your messages
remotely. If there are new messages in your answering machine, the outgoing message will start
playing after 3 rings. If there are no new messages, the outgoing message will be played after 5 rings.
Hence, if you want to check if you have any messages without incurring call charges, you can hang up
the call after the 4th ring.
ID937_IFU_EN.book Page 55 Friday, December 1, 2006 12:23 PM