Filter
Top Products
46
EN
Advanced Settings
Change Master PIN
The Master PIN is used for setting call barring/baby call number, registration/unregistration of handsets and for
accessing the answering machine remotely. The default Master PIN number is 0000. The length of the PIN is 4
digits. This PIN is also used to protect the settings of your handset. Your handset will prompt you whenever
the PIN is required.
To change Master PIN
1. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Change PIN and press
mSELECT.
2. Enter the current Master PIN when prompted and press
mOK to confirm. The PIN entered will be
shown as asterisks (*) on the screen.
3. Enter new PIN and press
mOK.
4. Enter new PIN again and press
mOK to confirm PIN change.
A validation tone is emitted, the message New PIN Stored appears and the screen returns to previous
menu.
Reset
Reset to default settings
1. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Reset and press
mSELECT.
2. Scroll
: to Yes and press mSELECT.
A validation tone is emitted and the unit is reset to its default settings (Please see "Default settings" on
page 15).
Auto Prefix
The maximum length of an auto prefix number is 5 digits. Once the number is set, it will be automatically
inserted at the beginning of each number that will be dialled.
To set auto prefix number
1. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Auto prefix and press
mSELECT.
2. The last stored auto prefix number is displayed (if any).
3. Enter the number and press
mOK to confirm.
A validation tone is emitted and the screen returns to previous menu.
If an incorrect PIN is entered, the screen returns to previous menu.
The WELCOME mode will appear again after master reset.
ID937_IFU_EN.book Page 46 Friday, December 1, 2006 12:23 PM