Filter
Top Products
45
EN
Advanced Settings
To register an additional handset
1. On the base station, press and hold p for 3 seconds. After that, the registration procedure has to be
done within 1 minute.
2. At the same time, on the handset, press
mMENU, scroll : to Advanced Set and press mSELECT,
scroll
: to Registration and press mSELECT.
3. Press
: to select the Base to be registered to and press mOK to confirm.
4. Enter the Master PIN when prompted and press
mOK to start registration.
A validation tone is emitted to indicate successful registration and the screen returns to stand-by mode.
Select Base
One ID937 handset can be registered to up to 4 different ID937 Base stations. By default, the handset will reg-
ister to BASE 1. If you select Best Base, the handset will register to the nearest base station.
To manually select best base station
1. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Select Base and press
mSELECT.
2. Scroll
: to the desired base station and press mOK to confirm.
3. The handset will start searching for the base station. If the selected base is found, a validation tone is emit-
ted.
Unregistration
To unregister a handset
1. Press mMENU, scroll : to Advanced Set and press mSELECT, scroll : to Unregistration and
press
mSELECT.
2. Enter the Master PIN when prompted and press
mOK to confirm.
3. Select in the list of handsets displayed, the handset that you wish to unregister.
A validation tone is emitted to indicate successful unregistration and the screen shows Unregistered.
Within 1 minute, the base station is able to accept registration from a handset. If there is no action
taken on the handset within 10 seconds, the registration procedure will be aborted.
If the PIN is incorrect, Incorrect PIN will be displayed and the handset returns to stand-by mode.
If no action is taken on the handset within 15 seconds, the unregistration procedure will be aborted
and the handset returns to stand-by mode.
ID937_IFU_EN.book Page 45 Friday, December 1, 2006 12:23 PM