Philips Telephone Answering Machine Answering Machine User Manual


 
23
EN
Phonebook
2. Slide the SIM card between the retaining clips, microchip facing down, until it stops.
3. Slide the SIM card cover back on the base station until it latches.
4. On the handset, press
mMENU, scroll : to Phonebook and press mSELECT, scroll : to Copy
from SIM and press
mSELECT.
5. Scroll
: to Copy All or Select Entry. If you choose Copy All then all entries in the SIM card will be cop-
ied to your phonebook. If you choose Select Entry, you can browse the SIM card entries and select the
ones you wish to copy (the entries in your SIM card may not be shown in alphabetical order ).
6. Press
mSELECT to confirm.
7. Enter the PIN code of the SIM card (if required). The copy progress will be displayed on the screen.
8. A message Transferred! will be displayed upon successful completion.
9. You can now retrieve your SIM card and close back the SIM card cover.
Transfer phonebook
This feature allows you to transfer the phonebook from one handset to another handset when there are at
least 2 handsets registered to your base station.
1. Press
mMENU, scroll : to Phonebook and press mSELECT, scroll : to Phbk transfer and press
mSELECT.
2. Scroll
: to Copy All or Select Entry.
If you choose Copy All then all entries in the handset will be copied to the selected handsets. If the target
phonebook contains a name that is exactly the same as the existing phonebook, you will be prompted
whether or not to overwrite the phonebook entry.
Your handset has the capacity to read the phonebook contents for standard SIM cards, including 3G
SIM cards. If the handset is unable to read the SIM card, or no SIM card is detected, the screen will
display an error message No SIM Card! and return to previous menu.
If the name on the SIM card is exactly the same as an existing name on the phonebook of your
handset, you will be prompted whether or not to overwrite the phonebook entry.
TIP You can select >CANCEL anytime to abort the process.
ID937_IFU_EN.book Page 23 Friday, December 1, 2006 12:23 PM