Philips SE 745 Telephone User Manual


 
5
Important
2Important
Take time to read this user manual before you
use your phone. It contains important
information and notes regarding your phone.
NOTICE: This product meets the applicable
Industry Canada technical specifications.
The equipment must be installed using an
acceptable method of connection. The customer
should be aware that compliance with the above
conditions may not prevent degradation of
service in some situations.
Repairs to certified equipment should be made by
an authorized Canadian maintenance facility
designated by the supplier. Any repairs or
alterations made by the user to this equipment,
or equipment malfunctions, may give the
telecommunications company cause to request
the user to disconnect the equipment.
Users should ensure for their own protection
that the electrical ground connections of the
power utility, telephone lines and internal metallic
water pipe systems, if present, are connected
together. This precaution may be particularly
important in rural areas.
CAUTION: Users should not attempt to make
such connections themselves, but should contact
the appropriate electric inspection authority, or
electrician, as appropriate.
NOTES: This equipment may not be used on coin
service provided by the telephone company.
2.1 Power requirements
This product requires an electrical supply of
220-240 volts AC. In case of power failure, the
communication can be lost.
The Electrical network is classified as
hazardous. The only way to power down the
charger is to unplug the power supply from the
electrical outlet. Ensure that the electrical
outlet is always easily accessible.
The voltage on the network is classified as
TNV-3 (Telecommunication Network
Voltages), as defined in the standard UL 60950.
Warning
To avoid damage or malfunction:
Do not allow the charging contacts or the
battery to come into contact with metal
objects.
Do not open it as you could be exposed to high
voltages.
Do not allow the charger to come into contact
with liquids.
Never use any other battery than the one
delivered with the product or recommended
by Philips: risk of explosion.
Always use the cables provided with the
product.
Handsfree activation could suddenly increase
the volume in the earpiece to a very high level:
make sure the handset is not too close to your
ear.
This equipment is not designed to make
emergency calls when the power fails. An
alternative has to be made available to allow
emergency calls.
Do not expose the phone to excessive heat
caused by heating equipment or direct sunlight.
Do not drop your phone or allow objects to
fall on your phone.
Do not use any cleaning agents containing
alcohol, ammonia, benzene, or abrasives as
these may harm the set.
Do not use the product in places where there
are explosive hazards.
Do not let small metal objects come into
contact with the product. This can deteriorate
audio quality and damage the product.
Active mobile phones in the vicinity may cause
interference.
About operating and storage temperatures:
Operate in a place where temperature is
always between 0 and 35º C (32 to 95º F).
Store in a place where temperature is always
between -20 and 45º C (-4 to 113º F).
Battery life may be shortened in low
temperature conditions.
2.2 Conformity
We, Philips declare that the product is in
compliance with the essential requirements and