Filter
Top Products
12
Getting started
4 Getting started
4.1 Connect the base station
Place the
base station in a central location near
the telephone line socket and electricity socket.
4.1.1 Wall Mounting
Wall mount installation is allowable in SE745. The
wall mount holes are located on the back of the
base unit and no extra wall mount pedestal is
needed. If you want to mount the phone on a
wall, simply slip the mounting holes on the back
of the base unit over the wall plate posts (not
included), and slide the unit down into place.
Warning
Please use ONLY UL approved wall plate.
Please use wall plate that can sustain at least
5.1kg.
Please ensure the wall plate has appropriate
and rigid mounting.
4.1.2 Install the base support
Note
The base station is wall mountable. Remove the
base support before mounting it to the wall.
Place the base station face down so that you
can see the bottom of the base station.
Attach the base support to your base station
by fitting the tabs of the base support into the
corresponding slots on the base unit.
Push into place until a click sound is heard.
To remove, simply pull the base support away
from the base unit.
4.1.3 Connect the line cord and power cable
Connect the line cord and the power cable to
their corresponding connectors at the bottom
of the base station as shown.
Connect the other end of the line cord to the
telephone line socket and the other end of
the power cable to the electricity socket.
Note
The line adaptor may not be attached to the line
cord. In this case, you have to connect the line
adaptor to the line cord first before plugging the
line cord to the line socket.
Warning
Avoid placing the base station too close to large
metal objects such as filing cabinets, radiators or
electrical appliances. This can impair the range
1
1
2
3
1
2
3
Bottom of
the base
support
4
1
2