17
Using your phone
5.2 Answer a call
When the phone rings, press r key.
• The call is established.
Note
Incoming call has priority over other events.
Whenever there is an incoming call, other status
in progress such as phone setting, menu
navigation, etc will be aborted.
Tip
If
AUTO ANSWER
mode (see “Activate /
Deactivate Auto Pick-up” on page 28) is
activated, you can simply lift up the handset from
its base station to answer the call. This feature is
deactivated by default.
Danger
When the handset rings during an incoming call,
please do not hold the handset too close to your
ear, as the volume of the ringing tone may damage
your hearing.
5.2.1 Handsfree answering
When the phone rings, press v key.
• The handset loudspeaker is activated.
Danger
Handsfree activation can suddenly increase the
volume in the earpiece to a very high level. Make
sure the handset is not too close to your ear.
5.3 End a call
To end a conversation, press e key.
Tip
If
Auto Hang-up
mode is activated (see “Activate
/Deactivate Auto Hang-up” on page 28) , you can
simply place the handset back to its base station
to end the call. This feature is activated by default.
Note
The call duration will be displayed on the handset
screen for about 5 seconds.