Filter
Top Products
38
Telephone answering machine (TAM)
simply record a new message to overwrite the
old one.
Repeat Steps 1 to 4 in “Set the Answer
mode” in the previous section.
Scroll
: to
Record message
and press
m
SELECT
.
Press
m
START
to start recording and
press m
STOP
to end the recording.
• The recorded message will be played and the
screen returns to previous menu once it has
finished playing.
Note
The maximum length of an outgoing message is 2
minutes.
10.5.1 Playback your Personalised
Outgoing Message
Repeat Steps 1 to 4 in “Set the Answer
mode” on page 37.
Scroll
: to
Play message
and press
m
SELECT
.
• The previously recorded outgoing message (if
any) is played, and then the screen returns to
previous menu.
10.6 Switch the Answering Machine On/
Off via handset
Press m
MENU
in idle mode, scroll : to
Answer Machine
and press m
SELECT
,
scroll : to
Ans. On/Off
and press
m
SELECT
.
Scroll
: to
On
or
Off
and press
m
SELECT
to confirm.
• A validation tone is emitted and the screen
returns to previous menu.
10.7 Answering Machine settings
10.7.1 Ring Delay
This is the number of rings before the answering
machine answers and starts playing your greeting
message. You can set the answering machine to
start playing your greeting message after
1
to
7
rings or
Toll saver
. The default ring delay is
5
.
Press
m
MENU
in idle mode, scroll : to
Answer Machine
and press m
SELECT
,
scroll : to
Ans. Settings
and press
m
SELECT
, press m
SELECT
to enter
Ring delay
.
Scroll : to your desired ring delay setting (
1
to
7
rings or
Toll saver
) and press
m
SELECT
to confirm.
• A validation tone is emitted and the screen
returns to previous menu.
Tip
Toll saver mode can save you the cost of a long-
distance call when you check your messages
remotely. If there are new messages in your
answering machine, the outgoing message will
start playing after 3 rings. If there are no new
messages, the outgoing message will be played
after 5 rings. Hence, if you want to check if you
have any messages without incurring call charges,
you can hang up the call after the 4th ring.
10.7.2 Remote Control Access
If you are far away from home and want to check
the messages on your answering machine, you can
make use of the remote access feature to check
your messages using another phone. Once you dial
your home number from any other phone and
enter the remote access code*, you will be able to
obtain the messages on your answering machine.
The keypad on the phone you use to dial acts like
the functions on your answering machine where
you can play or delete messages, turn your
answering machine on or off, etc.
Note
This feature is deactivated by default.
* Remote access code (which is the same as your
Master PIN code) prevents any unauthorised
1
2
3
1
2
1
2
1
2