Filter
Top Products
33
Advanced settings
will return to its default settings. However, your
phonebook as well as the unread messages of
your answering machine will remain unchanged
after reset.
Note
You may have to configure your phone once again.
In this case the WELCOME mode will appear again
after master reset. (go to chapter 3.3)
Press
m
MENU
in idle mode, scroll : to
Advanced Set
and press m
SELECT
, scroll
: to
Reset
and press m
SELECT
.
Scroll : to
Yes
and press m
SELECT
.
A validation tone is emitted.
• The unit is reset to its default settings (see
“Default settings” on page 34).
8.11 Set Auto Prefix
This feature allows you to define a prefix number to
be added to the beginning of a number during
predialling (see “Predialling” on page 16). You can
also use this feature to add a detect string to match
and replace the first few digits of the number during
predialling.
You can enter up to a maximum of 5 digits for the
detect string and 10 digits for the auto prefix number.
Note
The use of your SE745 cannot be guaranteed with
all types of PABX.
Press
m
MENU
in idle mode, scroll : to
Advanced Set
and press m
SELECT
, scroll
: to
Auto Prefix
and press m
SELECT
.
Detect digit
is displayed on the screen. Press
m
SELECT
to enter.
• The last stored detect string is displayed (if
any).
Enter a detect string number (maximum 5
digits) and press
m
OK
to confirm.
•
Prefix number
is displayed on the screen.
Press
m
SELECT
to enter.
• The last stored prefix number is displayed (if
any).
Enter the prefix number (maximum 10 digits)
and press
m
OK
to confirm.
• A validation tone is emitted and the screen
returns to previous menu.
Note
If no detect string (blank) is entered, the prefix
number will be automatically added to the predial
number after
r key is pressed.
For numbers starting with *, # or a pause (P), the
prefix number will not be added to the predial
number after
r key is pressed.
8.12 Country Selection
The availability of this menu is dependent on your
country.
You can select another country different from
the one chosen during WELCOME mode.
Note
Once the country is selected, the default line
settings for the selected country will be applied to
the phone automatically (e.g. Recall time, Dial
mode, Language, etc).
Press
m
MENU
in idle mode, scroll : to
Advanced Set
and press m
SELECT
, scroll
: to
Country
and press m
SELECT
.
Scroll : to the country of your choice and
press m
SELECT
.
Press
m
SELECT
again to confirm.
• A validation tone is emitted and the screen
returns to previous menu.
8.13 Activate/Deactivate Conference
mode
When conference mode is activated, you can
initiate a three-party conference call with a
second handset registered to your base station
automatically if the second handset takes the line
when there is already an external call in progress.
The default setting for this mode is
Off
.
Press
m
MENU
in idle mode, scroll : to
Advanced Set
and press m
SELECT
, scroll
: to
Conference
and press m
SELECT
.
Scroll
: to
On
or
Off
and press
m
SELECT
to confirm.
• A validation tone is emitted and the screen
returns to previous menu.
1
2
1
2
3
4
5
1
2
3
1
2