Filter
Top Products
32 EN
Set the carrier code, area code,
country code and domestic code
You can enter these values for your phone’s
current location if you have used them in
entering numbers on your computer. In case
you transfer a number to your phone, your
phone will use this information to remove these
codes from local numbers, as they can lead to
unsuccessful calls when dialed on a landline.
For example if on your computer you have stored
the number +49 40 1234567, with +49 being the
local country code and 40 being the area code,
the phone will save that number in your phone as
040 1234567 (that is, removing the country code
and add a ‘0’ for local numbers).
1
Tap from the main menu screen.
2
Select [Call settings] > [Carrier
code]/[Area code]/[Country
code]/[Domestic code].
3
Enter a code of 4 digits at maximum, then
tap [OK] to conrm.
» The setting is saved.
Select the recall duration
Make sure that the recall time is set correctly
before you can answer a second call. In normal
case, the phone is already preset for the recall
duration. You can select among 3 options:
[Short], [Medium] and [Long]. The number of
available options varies with different countries.
For details, consult your service provider.
1
Tap from the main menu screen.
2
Select [Call settings] > [Recall time].
3
Select an option.
» The setting is saved.
First ring
If you have subscribed to the caller ID service
with your service provider, your phone can
cancel the rst ring before the caller ID is
displayed on the screen. After the phone is reset,
it can detect automatically if there is a caller
subscription and start to cancel the rst ring. You
can change this setting to suit your preference.
This feature only applies to models with rst
ring support.
Turn the rst ring on/off
1
Tap from the main menu screen.
2
Select [Call settings] > [First ring].
3
Select [On]/[Off].
» The setting is saved.
Note
•
To reset the rst ring status, go to the reset menu (see
‘Restore default settings’ on page 31).
Auto clock
Note
•
This service is network dependent.
• Make sure you have subscribed to the caller ID service
before you use this feature.
It synchronizes the date and time on your phone
with the public switched telephone network
(PSTN) automatically. For the date to be
synchronized, make sure the current year is set.
1
Tap from the main menu screen.
2
Select [Call settings] > [Auto clock]
3
Select [On]/[Off].
» The setting is saved.