Filter
Top Products
8 EN
Change the remote access
PIN code
Note
•
The default answering machine remote access PIN
code is 0000 and it is important to change it to ensure
the security.
1
Tap from the main menu screen.
2
Select [Remote access] > [Change PIN].
3
Enter the old remote access PIN/passcode,
then tap [OK] to conrm.
4
Enter the new remote access PIN/passcode,
then tap [OK] to conrm.
5
Enter the new remote access PIN/passcode
again, then tap [OK] to conrm.
» The setting is saved.
Charge the handset
Place the handset on the base station to charge
the handset. When the handset is placed
correctly on the base station, you hear a docking
tone (see ‘Set the docking tone’ on page 35).
» The handset starts charging.
Note
•
Charge the battery for 6 hours before rst use.
• It is normal for the handset to become warm during
charging.
• Over time, capacity of batteries decreases. This is a
normal battery behavior.
• You can order replacement batteries through www.
philips.com or the Philips Service organization.
• When the phone is not in use, place the handset to the
base station or charging cradle.
Your phone is now ready to use.
Check the battery level
The battery icon displays the current battery
level.
When the handset is off the base
station/charger, the bars indicate the
battery level (from full to low).
When the handset is on the base
station/charger, the bars keep scrolling
until charging is complete.
When the battery is empty, this icon
ashes. If you are in a call you hear an
alert tone.
The battery is low and needs recharging.
If you are on the phone, you hear warning tones
when the battery is almost empty. The handset
turns off when the battery is completely empty.
What is standby mode?
Your phone is in standby mode when it is idle.
In standby mode the screen will display the
time and date and notications of missed calls
or messages. Depending on your settings, a
screensaver will also be displayed in standby
mode (see ‘Screen saver’ on page 37). The
screen will dim or turn off if the handset is not
on the base station or charging cradle.