English
EN 31
Name the handset
The name of the handset can be up to 16
characters. It helps to identify a handset for
conference calls if multiple handsets are
connected to the base.
1
Tap from the main menu screen.
2
Select [Phone settings] > [Phone name].
3
Enter or edit the name with the keyboard.
» The setting is saved.
Display settings
You can change the display of the phone during
standby mode.
Set the brightness, wallpaper and backlight
You can change the display properties during
standby mode, such as display brightness,
backlight behaviour and wallpaper.
1
Tap from the main menu screen.
2
Select [Phone settings] > [Display] > [Brig
htness]/[Wallpaper]/[Backlight].
3
Select an option.
» The setting is saved.
Restore default settings
You can reset your phone settings to the original
factory settings.
1
Tap from the main menu screen.
2
Select [Phone settings] > [Factory
settings].
3
Select if you want to remove the data.
4
Tap [OK] to conrm.
» All settings are reset.
Note
•
If you select to keep the data when restoring default
settings, the contacts, call logs and answering machine
messages will be retained.
Demo mode
Demo mode shows key features of the product.
You can exit demo mode by tapping on the
screen.
Call settings
Auto prex
This feature checks and formats your outgoing
call number before it is dialed out. The prex
number can replace the detect number you
set in the menu. For example, you set 604 as
the detect number and 1250 as the prex.
When you have dialed out a number such as
6043338888, your phone changes the number
to 12503338888 when it dials out.
Note
•
The maximum length of a detect number is 5 digits. The
maximum length of an auto prex number is 10 digits.
Set auto prex
1
Tap from the main menu screen.
2
Select [Call settings] > [Auto prex].
3
Enter the detect number, then tap [OK] to
conrm.
4
Enter the prex number, then tap [OK] to
conrm.
» The setting is saved.
Note
•
This is a country dependent feature.
• To enter a pause, press and hold #.
• If the prex number is set and the detect number is left
empty, the prex number is added to all outgoing calls.
• The feature is unavailable if the dialed number starts
with * and #.