Filter
Top Products
28 EN
Delete an incoming message
1
When you listen to the message, tap .
» The current message is deleted.
Delete all old incoming messages
1
Tap from the main menu screen.
2
Select [Delete all].
» The handset displays a conrmation
request.
3
Select [Yes] to conrm.
» All old messages are permanently
deleted.
Note
•
You can only delete the read messages. No deleted
messages can be recovered.
Call screening
You can hear the caller while he is leaving a
message. Press
to answer the call.
Set the ring delay
You can set the number of times the phone
rings before the call goes to the answering
machine.
1
Tap from the main menu screen.
2
Select [Ring delay].
3
Select a new setting.
» The setting is saved.
Note
•
The answering machine needs to be switched on
before applying this setting.
Set the sound quality of the message
You can adjust the sound quality of the
messages received from the answering machine.
1
Tap from the main menu screen.
2
Select [Message quality].
3
Select the new setting.
» The setting is saved.
Note
•
The sound quality can only be adjusted before
recording starts.
• Depending on the sound quality, the maximum
number/length of recorded messages changes. In high
quality setting, a maximum of 15 mins of messages can
be stored. In the low quality setting, approximately 60
minutes can be stored.
Remote access
You can operate your answering machine when
you are away from home. Simply make a call to
your phone with a touch tone phone and enter
your 4-digit PIN code.
Note
•
The remote access PIN code is the same as your
system PIN. The preset PIN is 0000.