Filter
Top Products
English
EN 29
Activate/deactivate the remote access
You can allow or block remote access to the
answering machine.
1
Tap from the main menu screen.
2
Select [Remote access].
3
Tap the switch to turn it on or off.
» The setting is saved.
Tip
•
When you access the answering machine remotely,
you are recommended to set the ring delay to[Toll
saver] mode. This is a cost effective way to manage your
messages. When there are new messages, the answering
machine picks up the call after 3 rings. When there is
no messages, it picks up the call after 5 rings, giving you
the opportunity to hang up before a connection is
established in case there are no new message.
Change the PIN/passcode
1
Tap from the main menu screen.
2
Select [Remote access] > [Change PIN].
3
Enter the old remote access PIN/passcode,
then tap [OK] to conrm.
4
Enter the new remote access PIN/passcode,
then tap [OK] to conrm.
5
Enter the new remote access PIN/passcode
again, then tap [OK] to conrm.
» The setting is saved.
Access the answering machine remotely
1
Make a call to your home number with a
touch tone phone.
2
Enter # when you hear the announcement.
3
Enter your PIN code.
» You now have access to your answering
machine, and you can listen to the new
messages.
Note
•
You have 2 chances to enter the correct PIN code
before your phone hangs up.
4
Press a key to carry out a function. See the
Remote access commands table below for
a list of available functions.
Note
•
When there is no message, the phone hangs up
automatically if no key is pressed for 8 seconds.
Remote access commands
Key Function
1 Repeat the current or listen to the
previous message.
2 Listen to messages.
3 Skip to the next message.
6 Delete the current message.
7 Switch the answering machine on.
(not available when you listen to the
messages).
8 Stop listening to the message.
9 Switch the answering machine off.
(not available when you listen to the
messages).