Filter
Top Products
14 EN
From the handset
1
Tap from the main menu screen.
2
Place the mobile phone close to the base
station, then tap [Find Me] on the handset.
» The mobile phone name is displayed
on the handset screen.
3
On the mobile phone, select Philips S10
and connect.
4
Enter the Bluetooth PIN/passcode on the
mobile phone, if necessary.
» When S10/S10A and the mobile phone
are paired,
or is displayed on
the handset screen.
Tip
•
The default Bluetooth PIN/passcode is 0000.
Note
•
The phone can be connected up to 2 Bluetooth
devices simultaneously.
• The phone can store up to 8 devices, to which it will
reconnect automatically if they are in range, and less
than 2 devices are connected. If more than 8 devices
have been paired, delete some devices from the list
before pairing another one. See ‘Manage your mobile
phone’s connection’ in this chapter for information.
• If the name of S10/S10A exists in your mobile phone,
you have to remove it from your mobile phone. Then
you can do the pairing again.
Manage your mobile phone’s
connection
You can manage your mobile phones list in this way:
1
Tap from the main menu screen.
2
Select [Mobile/Computer].
» The mobile phones and computers list
are displayed.
3
Select a mobile phone, then select [Privacy
mode]/[Disconnect device]/[Delete device].
Note
•
If 2 devices are connected, you have to disconnect a
device before connecting another one.
• You can see [Disconnect device] in the option list only
when the mobile phone is connected; and [Connect]
only when the mobile phone is disconnected.
• For information on [Privacy mode], refer to the next
section.
Mobile settings
You can set the privacy mode or change the
PIN/passcode through [Mobile settings].
Privacy mode
You can select this option to set whether the
mobile’s contacts are available for viewing.
To access this menu, press the PIN/passcode
(0000). Select among 2 options: [Auto range]
and [Change PIN].
From [Auto range], you can set whether the
mobile’s contacts are available for viewing.
You can select among these 3 options:
• [Off] : no PIN/passcode is required to
access the mobile’s contacts which are
always available for viewing.
• [Auto range] : no PIN/passcode is
required to access the mobile’s contacts
which are available for viewing only
when the mobile phone is within the
Bluetooth range.
• [PIN] : follow the on-screen instruction
to activate or change the PIN/passcode.
If you choose this option, your mobile’s
contacts are always available on your
S10/S10A, but a PIN/passcode is
required anytime you want to access
them.
From [Change PIN], you can change your PIN/
passcode for the privacy mode.