Filter
Top Products
22
Use more of your phone
5.6.9 How to turn on/off room monitoring
This feature allows you to monitor a room by
placing the handset in a room to be monitored.
The monitored handset will not ring when there
is an external incoming call or internal call. The
monitored handset will turn on the speaker
automatically if any other registered handsets
want to reach the monitored handset.
Mute On
will appear in the screen of the calling handset by
press
< when the internal call is set up. If the
calling handset want to talk to the monitored
handset, press
< to unmute the microphone.
Note
You must have at least 2 handsets registered to
your base station in order to use this feature.
Press
< to access the main menu
Press
u/d to select
Personal Set
Press < and u/d to select
Room
Monitor
Press < and u/d to choose
On
or
Off
Press < to save the settings.
Note
If room monitor is set to
On
,
Room Monitor On
will display on standby.
5.6.10How to turn on/off the keypad
backlight
Press < to access the main menu
Press
u/d to select
Personal Set
Press < and u/d to select
Backlight
Press < and u/d to select
On
or
Off
Press < to save the settings
Note
If there is no key press within 20 seconds, the
keypad backlight and LCD backlight will be turned
off automatically. Press any key can turn on the
keypad backlight. To turn on the LCD backlight,
press
< or >.
5.7 Advanced settings
5.7.1 How to select recall time
Recall time is the time delay by which the line will
be disconnected after you press
r. The default
value of recall time preset in your phone should
be the best suited for your country network. You
do not need to change it.
Press
< to access the main menu
Press
u/d to select
Advanced Set
Press < to select
Recall Time
Press < to select the recall time of your
country
Note
Number of available recall time options varies
with different countries.
Press
< to confirm
5.7.2 How to set the dial mode
The default value for dial mode that is preset in
your phone should be the best suited for your
country network and therefore you do need to
change it.
There are two dial modes: Tone or Pulse.
Press
< to access the main menu
Press u/d to select A
dvanced Set
Press < and u/d to select
Dial Mode
Press < and u/d to select
Tone
or
Pulse
Press < to save the settings
5.7.3 Call barring
Call barring enables you to restrict selected
handsets from dialing a phone number beginning
with certain numbers. You can set up to four
different barring numbers, with each number
containing up to four digits.
Note
You will be required to enter the 4-digit master
PIN before you can activate or deactivate call
barring mode, add or modify call barring number.
5.7.3.1 How to set call barring mode on/
off
Press
< to access the main menu
Press u/d to select
Advanced Set
Press < and u/d to select
Call
Barring
Press < to enter the 4-digit master PIN
when prompted (default master PIN is 0000)
Press
< to select
Barring Mode
Press < to select
On
or
Off
Press < to save the settings
Note
If barring mode is set to on,
Call Barr On
will
display on idle screen.
1
2
3
4
5
1
2
3
4
5
1
2
3
4
5
1
2
3
4
5
1
2
3
4
5
6
7
CD645_IFU_US_English.book Page 22 Friday, August 3, 2007 5:10 PM