Philips CD6452B Cordless Telephone User Manual


 
11
Getting started
3 Getting started
3.1 Connect the base station
Caution
Avoid placing the base station too close to large
metal objects such as filing cabinets, radiators or
electrical appliances. This can impair the range
and sound quality. Buildings with thick internal
and external walls may impair transmission of
signals to and from the base.
Warning
Power is applied when the power adaptor is
plugged into the unit and connected to the
electricity socket. The only way to power down
the unit is to unplug the power adaptor from the
electricity socket. Therefore, ensure that the
electricity socket is easily accessible.
The power adaptor and the telephone line cord
have to be connected correctly, as incorrect
connection could damage the unit.
Always use the telephone line cord supplied with
the unit. Otherwise, you may not get a dial tone.
Insert the plug of the power cord into the
socket under the base station.
Insert the plug of the line cord into the socket
under the base station.
Connect the other end of the line cord to the
telephone line socket and the other end of
the power cable to the electricity socket.
Note
The line adaptor may not be attached to the line
cord. In this case, you have to connect the line
adaptor to the line cord first before plugging the
line cord to the line socket.
3.2 Install rechargeable batteries
Your CD645 is supplied with two rechargeable
batteries. Before using the handset, install the
batteries into the handset and fully charged them
up.
Slide out the battery cover
Place the batteries as indicated in the battery
compartment and replace the battery cover.
3.3 Place the handset on the charging
cradle
Note
Charge the handset for at least 24 hours before
using it for the first time.
When the battery is fully charged, the talk time of
your phone is approximately 12 hours and the
standby time is approximately 150 hours.
Place the handset on the charging cradle of
the base station.
Leave it there until the batteries are fully
charged.
When the handset is fully charged, is
displayed.
!
1
2
3
1
2
1
2
3
CD645_IFU_US_English.book Page 11 Friday, August 3, 2007 5:10 PM