Filter
Top Products
15
Using your phone
4.6.2 How to transfer an external call to
another handset
During an external call:
Press
c to initiate an internal call
• The handsets available for intercom will be
displayed and the external call is put on hold
automatically.
Press
u/d to select your desired
handset
Press
< to call your desired handset
• Your desired handset rings.
Press
r on the called handset to start
intercom
Note
You can press
c to switch the call between the
internal call and the external call.
Press
e on the calling handset
• The calling handset transfers the external call to
the called handset.
4.6.3 How to make a 3-way conference call
The conference call feature allows one external
call to be shared with two handsets (in intercom).
The three parties can share the conversation and
no network subscription is required.
During an external call:
Press c to initiate an internal call
• The handsets available for intercom will be
displayed and the external call is put on hold
automatically.
Press
u/d to select your desired
handset
Press
< to call your desired handset
• Your desired handset rings.
Press
r on the called handset to start
intercom
Note
You can press
c to switch the call between the
internal call and the external call.
Long press
c on the calling handset
• The calling handset, called handset and the
external call would be in 3-way conference.
During the conference call:
Press
c to put the external call on hold and
go back to internal call
• The external call is put on hold automatically.
Press and hold
c to establish the conference
call again
Note
Any handset hangs up during a conference call will
leave the other handset still in connection with
the external call.
4.6.4 Caller Line Identification (CLI)
Caller Line Identification (CLI) is a special service
that you may subscribe from your network
operator. If you have subscribed to CLI service
and provided that the identity of the caller is not
withheld, the number or name of the caller will be
displayed when the phone rings so that you may
decide whether to answer the call or not. Please
contact your network provider for more
information on this service.
4.6.5 Call waiting
If you have subscribed to Call Waiting service, the
earpiece will emit a beep tone to inform you that
there is a second incoming call. The number or
name of the second caller will also be displayed if
you have subscribed to Caller Line Identification
service (CLI). Please contact your network
provider for more information on this service.
To answer the second call, press
r.
4.7 How to find a handset
You can locate the handset by pressing
p on the
base station.
All the handsets registered to the base will
produce the paging tone and you can stop the
paging by pressing
r/ e/ v/ > on the
handset or
p on the base again.
1
2
3
4
5
1
2
3
4
5
1
2
CD645_IFU_US_English.book Page 15 Friday, August 3, 2007 5:10 PM