Filter
Top Products
14
Using your phone
4.3 Answer a call in handsfree mode
When the phone rings, press v.
• The call is established and is on. You can talk
to the caller without holding the handset.
Warning
When the handset rings during an incoming call,
please do not hold the handset too close to your
ear as the volume of the ringing tone may damage
your hearing.
Note
Incoming call has priority over other events.
Whenever there is an incoming call, other status
in progress such as phone settings, menu
navigation, etc will be aborted.
Tip
If auto pick-up mode is activated, you can lift up
the handset from its base station to answer the
call.
4.4 End a call
Press e during a call connection
• The call ends.
OR
Put the handset on to the base station
• The call ends.
4.5 Recall
To use this feature, you have to subscribe the
service with your local service provider.
You can use the recall function to make or
received a second call. The operations mentioned
in Section 4.5.1 and 4.5.2 may be varied by
countries and local service providers. Consult
the details of recall operation of this service from
your local service provider.
Warning
Call back from the call list may not work for all
received numbers.
4.5.1 How to make a second call
During a call:
Press
< and u/d to select
Init. 2ND
Call
Press < to dial your second call number
• The second call is initiated.
Note
You can press
< and u/d to select
Switch Calls
or
Conference
to switch calls
between the first and second calls or to make a
conference call.
4.5.2 How to answer a second call
To use this feature, you have to subscribe the
service with your local service provider. If
another call comes in during a call, you will hear
a short beep periodically.
During displaying caller ID, press
< and u/
d to select functions to accept or reject the
second call.
Note
After accepting the second call, you can press
< and u/d to select
Switch Calls
or
Conference
to switch calls between the first and
second calls or to make a conference call.
Note
If you have subscribed the Caller ID service, the
caller ID of your callers will appear on the display.
4.6 How to use the intercom
This feature is only available when there are at
least two registered handsets. It allows you to
make internal calls, transfer external calls from
one handset to another handset and make
conference calls.
4.6.1 How to make an internal call
In idle mode:
Press
c
• The handsets available for intercom will be
displayed.
Press
u/d to select your desired
handset
Press
< on the calling handset
• Your desired handset rings.
Press
r on the called handset
• The intercom is established.
Note
If the called handset is busy, a busy tone will be
emitted from the calling handset.
!
!
1
2
1
2
3
4
CD645_IFU_US_English.book Page 14 Friday, August 3, 2007 5:10 PM