Filter
Top Products
S-ICX-50-200 S-ICX (International) issued October 2000 31
AUTO DAY/NIGHT MODE
Description:
The S-ICX system provides three different modes of operation. We call them Day 1, Day 2 and
Night mode. Each of these modes can have a different Attendant as well as different ringing
position assignments for extensions. The system can be programmed to automatically switch in
and out of any one of these modes at a preset time each day. Weekends, holidays, and other
special days can also be programmed with their own separate modes.
Benefits:
• Enables the system’s ringing and dialing capabilities to change automatically when
the mode is switched.
Applications:
• Lines that need to be switched over to an answering machine or voice mail system
after-hours
• Lines that require toll restrictions (call barring) after-hours so unauthorized personnel
cannot dial long distance
• Different mode for lunchtime operation (Day 2 mode)
AUTOMATIC ROUTE SELECTION (ARS)
This feature enables the system to select the most appropriate route for an outgoing call (i.e., the
least expensive one). Working in conjunction with Toll Restriction Service (TRS) or Call Barring,
the call can also be denied based on the TRS level for the station (or user) placing the call.
There are three levels of ARS, based on the number dialed after the ARS access code:
• Direct Route Selection. The simplest form of ARS routing. Directly selects the trunk
group and (if programmed) modifies the dialed number by deleting some of the first
digits dialed, and/or adding digits to the beginning or end of the dialed number.
• Route List Selection. A more complex routing method that includes up to 5
alternative levels of route selection.
• Time List Selection. The most complex routing method that determines the
appropriate route list based on the day and time.
For “exceptions to the rule” such as holidays, up to 20 Special Days can be defined in
programming with their own separate ARS routing methods.
Codes can be defined in ARS programming for automatic adding to (or deleting from) the
beginning or end of a dialed phone number (the user won’t even know these Codes are being
dialed). For example, these Codes can insert a pause, or switch signaling to DTMF, or just tack
on additional digits that are needed by the exchange line.
Forced ARS (where the user must dial an ARS access code to be able to dial-out) can be
enabled/disabled via the Extension COS assignment.
Benefits:
• Lets the customer (management) control the routing of outgoing calls by defining the
route to be selected.
• Provides an effective means of cost control for expensive long-distance calls.
• Provides greater security, as end-users don’t need to know the Itemized Codes or
Authorization Codes used to place calls to the exchange line.