Panasonic S-ICX Telephone User Manual


 
20 S-ICX (International) issued October 2000 S-ICX-50-200
Options
DTMF Multi-Frequency Receiver Card - MFR/8 (VB-44110UK)
The MFR/8 card accepts dialed DTMF tones and determines the dialed digits. Each card contains 8
receiver circuits.
This card can be installed in any flexible slot. The maximum number of MFR/8 cards that can be
installed is two.
Conference Card (4 circuits) - CONF (VB-44120UK)
This is a conference speech card with four 8-party conference circuits. One conference card per
cabinet can be installed into any flexible slot. An 8-party conference can consist of 8 extensions; 7
extensions + 1 external line; or 1 extension + 7 external lines (or any combination in between).
Special Application Processor Interface Card - SAPI (VB-44132UK) (For Future
Use)
This 4-port card installs in special IS2 slot, and does not occupy a free slot. DO NOT insert card while
unit is powered on.
External interface: RS232C port (19200bps maximum)
Built-In ACD Card - ACD (VB-44140UK)
This card, combined with the Voice Processor Unit card (4 circuits) (VB-44160), provides basic
Automatic Call Distribution functions. MIS (Management Information System) reports can be output
from the RS232C port of the ACD card. The reports can be printed out by connecting a printer to the
RS232C port. However, a PC and printer cannot be simultaneously connected to the RS232C (the
RS232C cable must be used exclusively for one connection).
Only one Built-In ACD can be installed in flexible slot 4 or 5.
Voice Processing Card (4 circuits) - VPU/4 (VB-44160UK)
This card contains 4 voice processing circuits. It can be used with Built-In ACD.
Built-In ACD uses only 1 voice processing card (the 4-circuit card).
Additional Options
Station Equipment
Overview
The full line of Panasonic ICX phone systems offer a wide variety of critically acclaimed telephones.
As the user interface, the station instrument is a crucial element of the communications system. All
ICX telephones are designed to provide easy access to system features and functions. A mixture of
Option Location Description
RS232 port Backplane (mother board) 2 ports (max. 9600 bps)
BGM input terminal CPC-HM 1 port (with RCA jack)
On/Off control of external amplifier CPC 1 contact
On/Off control of external equipment Backplane (mother board) 5 contacts (withstand 30V)