Filter
Top Products
Useful Information
55
3 Adjust the adaptor to hold the base unit, then push it in the direction of the arrow until
it clicks into place.
4 Drive the screws (not included) into the wall using the wall-mount template (see below)
as a guide. Mount the unit and slide it down into position. Connect the AC adaptor and
telephone line cord to their respective outlets.
Raise the antennas.
83 mm
(230-240 V AC,
50/60 Hz)
Screws
To socket
83 mm
Wall mount template for the base unit
TG6700AL.book Page 55 Tuesday, June 27, 2006 2:08 PM