Filter
Top Products
Answering System
41
LThe messages on the selected line(s)
in step 1 are erased.
Listening to messages
using the handset
When new messages have been
recorded:
–“New message” is displayed.
– the message indicator on the handset
slowly flashes in amber if the message
alert feature is turned on (page 47).
1 {^} or {V} i {PLAY}
LThe handset plays new messages
including memo messages.
LWhen you have no new messages,
the handset plays back all messages.
2 When finished, press {OFF}.
Note:
LTo switch to the receiver, press {C}.
Adjusting the receiver/speaker volume
Press {^} or {V} repeatedly while listening
to a message.
Voice guidance
If you do not press any buttons after the
last message is played back, the unit’s
voice guidance starts. Operate the
answering system by following the
guidance as necessary.
Calling back (Caller ID subscribers
only)
If Caller ID information was received for
the call, you can call the caller back while
listening to the message.
1 Press {CALL} during playback.
TG6700AL.book Page 41 Tuesday, June 27, 2006 2:08 PM