Filter
Top Products
Programming
33
Programmable settings
You can customise the unit by programming the following features using the handset. To
access the features, there are 2 methods:
– scrolling through the display menus (page 33)
– using the direct commands (page 35)
LThe direct command method is mainly used in these operating instructions.
Programming by scrolling through the display menus
1 {MENU}
2 Press {^} or {V} to select the desired menu. i {SELECT}
LIf there are sub-menu(s), press {^} or {V} to select the desired item. i {SELECT}
Example: To access the handset ringer volume setting
Press {^} or {V} to select “Ringer setting”. i {SELECT}
Then press {^} or {V} to select “Ringer volume”. i {SELECT}
3 Press {^} or {V} to select desired line.
LThis step may not be necessary depending on the feature being programmed.
4 Press {^} or {V} to select the desired setting.
LThis step may vary depending on the feature being programmed.
5 {SAVE} i {OFF}
Main menu Sub-menu 1 Sub-menu 2 Page
Message playback – – 40, 41
Phonebook ––26
Ringer setting Ringer volume ––
Ringer tone ––
Interrupt tone ––
Date and time
*1
––19
Voice enhancer ––24
Copy phonebook Copy 1 item –28
Copy all items –28
TG6700AL.book Page 33 Tuesday, June 27, 2006 2:08 PM