Filter
Top Products
Answering System
46
to leave your answering machine off on
your unit.
This will allow the Voice Mail to receive
any messages.
This unit does not have a visual indicator
to indicate if there are new messages in
your Voice Mail service. Your service
provider/telephone company may use a
“Stutter” dial tone (special dial tone) to
indicate that there are new messages on
your Voice Mail.
LTo use the unit’s answering machine
rather than the Voice Mail service
provided by your service provider/
telephone company, please consult your
service provider/telephone company to
have it removed or deactivated
permanently or temporarily.
Alternatively you can leave this service
connected and change the “Ring
count” to a shorter duration on your unit
so your unit’s answering machine can
pick up the call prior to the Voice Mail
provided by your service provider/
telephone company.
Note:
LProvider Voice Mail can capture
messages that can be missed while the
customer is on the Internet.
Caller’s recording time
You can change the maximum message
recording time allotted to each caller.
The default setting is “3min”.
“Greeting only”: The unit plays the
greeting message but does not record
caller messages.
1 {MENU} i {0}{6}{2}
2 Select the desired line.
3 Select the desired setting. i {SAVE}
i {OFF}
Note:
LIf the message memory becomes full,
the unit automatically switches to the
“Greeting only” mode and no new
messages are recorded. If you have
recorded your own greeting message,
that same greeting message is
announced to callers even though their
messages are not recorded. If you have
not recorded your own greeting
message, the prerecorded message
used for “Greeting only” mode is
announced to callers (page 39).
Remote code
A remote code must be entered when
operating the answering system remotely.
This code prevents unauthorised parties
from listening to your messages remotely.
The default setting is “11”.
1 {MENU} i {0}{6}{3}
2 Enter the desired 2-digit remote code.
i {SAVE} i {OFF}
Handset
Handset
TG6700AL.book Page 46 Tuesday, June 27, 2006 2:08 PM