Filter
Top Products
Useful Information
34
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display message Cause/solution
Check Phone Line L The supplied telephone line cord has not been connected
yet or not connected properly. Check the connections
(page 7).
Memory Full L The phonebook memory is full. Erase unnecessary
entries (page 18).
L The call barred list memory is full. Erase unnecessary
entries (page 24).
No link. Reconnect AC
adaptor.
L The handset has lost communication with the base unit.
Move closer to the base unit and try again.
L Unplug the base unit’s AC adaptor to reset the unit.
Reconnect the adaptor and try again.
L The handset’s registration may have been cancelled.
Re-register the handset (page 24).
Use rechargeable battery. L A wrong type of battery such as Alkaline or Manganese
was inserted. Use only the rechargeable Ni-MH batteries
noted on page 3, 4.
You must first subscribe to
Caller ID.
L You must subscribe to a Caller ID service. Once you
receive caller information after subscribing to a Caller ID
service, this message will not be displayed.
TG6451BX(e).book Page 34 Wednesday, July 8, 2009 10:25 AM