Filter
Top Products
Making/Answering Calls
14
4 Proceed with the operation for your unit.
Base unit: Lift the corded handset.
Handset: {C}
Note:
L A 3 second pause is inserted each time {R} on
the base unit or l on the handset is pressed.
Repeat as needed to create longer pauses.
Answering calls
Using the base unit =
When a call is being received, the speakerphone
indicator flashes.
1 Lift the corded handset or press {s} when the
unit rings.
2 When you finish talking, place the corded
handset on the cradle. When the
speakerphone is used, press {s}.
Adjusting the base unit ringer volume
■ While the base unit is ringing for an
incoming call:
Press {^} or {V} repeatedly to select the desired
volume.
■ Programming the volume beforehand:
1 8 (middle soft key)
2 {V}/{^}: “Ringer Setup” i M
3 {V}/{^}: “Ringer Volume” i M
4 {V}/{^}: Select the desired volume.
5 M i {b}
Using the handset Y
When a call is being received, the ringer indicator
flashes.
1 Lift the handset and press {C} or {s} when
the unit rings.
L You can also answer the call by pressing
any dial key from {0} to {9}, {* }, or {#}.
(Any key answer feature)
2 When you finish talking, press {ih} or place
the handset on the charger.
Auto talk
You can answer calls simply by lifting the handset
off the charger. You do not need to press {C}. To
turn this feature on, see page 21.
Adjusting the handset ringer volume
■ While the handset is ringing for an incoming
call:
Press {^} or {V} repeatedly to select the desired
volume.
■ Programming the volume beforehand:
1 8 (middle soft key)
2 {V}/{^}: “Handset Setup” i M
3 {V}/{^}: “Ringer Setup” i M
4 {V}/{^}: “Ringer Volume” i M
5 {V}/{^}: Select the desired volume.
6 M i {ih}
Useful features during a call
Hold
This feature allows you to put an outside call on
hold.
1 Press {a} during an outside call.
L If you are using the corded handset, you can
place it on the cradle.
2 To release hold, lift the corded handset or
press {s}.
L A handset user can take the call by pressing
{C}.
Note:
L If a call is kept on hold for more than 9 minutes,
the base unit starts to sound an alarm tone. After
1 additional minute on hold, the call is
disconnected.
L If another phone is connected to the same line,
you can also take the call by lifting its handset.
L While an outside call is on hold, the
speakerphone indicator on the base unit
flashes.
= Base unit
TG6451BX(e).book Page 14 Wednesday, July 8, 2009 10:25 AM