Filter
Top Products
Phonebook
18
Erasing entries
Erasing an entry
1 Find the desired entry (page 17). i 8
2 {V}/{^}: “Erase” i M
3 {V}/{^}: “Yes” i M i {b}
Erasing all entries
1 n (left soft key) i 8
2 {V}/{^}: “Erase All” i M
3 {V}/{^}: “Yes” i M
4 {V}/{^}: “Yes” i M i {b}
Erasing an entry
1 Find the desired entry (page 17). i 8
2 {V}/{^}: “Erase” i M
3 {V}/{^}: “Yes” i M i {ih }
Erasing all entries
1 n (left soft key) i 8
2 {V}/{^}: “Erase All” i M
3 {V}/{^}: “Yes” i M
4 {V}/{^}: “Yes” i M i {ih }
Chain dial
This feature allows you to dial phone numbers in
the phonebook while you are on a call. This feature
can be used, for example, to dial a calling card
access number or bank account PIN that you have
stored in the phonebook, without having to dial
manually.
1 Proceed with the operation for your unit.
Base unit:
During an outside call, press n.
Handset:
During an outside call, press 8. i M
2 {V}/{^}: Select the desired entry.
3 Press M to dial the number.
Note:
L When storing a calling card access number and
your PIN in the phonebook as one phonebook
entry, press {R} on the base unit or l on the
handset to add pauses after the number and
PIN as necessary (page 13).
L If you have rotary/pulse service, you need to
press {*} before pressing n on the base unit
or 8 on the handset in step 1 to change the
dialling mode temporarily to tone. When adding
entries to the phonebook, we recommend
adding {*} to the beginning of phone numbers
you wish to chain dial (page 17).
Speed dial
You can assign 1 phone number from the
phonebook to each of the 5 speed dial buttons.
Assigning a phonebook entry to a speed dial
button
1 Find the desired entry (page 17).
2 Press the speed dial button you want to
assign to. i M
L If “Overwrite” is displayed, the button
you selected has a phone number already
assigned to it.
To overwrite with the currently selected
phone number, go to step 3.
To select another button, press U, then
repeat this step.
3 M i {b}
Note:
L In step 2, you can also press 8. i
{V}/{^}: “Speed Dial” i M i
{V}/{^}: Select the desired speed dial button.
i M
L If a speed dial button has already been
assigned, “Q” is displayed next to the button in
step 2.
= Base unit
Y Handset
= Base unit / Y Handset
= Base unit
TG6451BX(e).book Page 18 Wednesday, July 8, 2009 10:25 AM