Filter
Top Products
Useful Information
I cannot set the alarm. • In order to set the alarm, you must first set the date
and time (page 14).
• The handset has lost communication with the base
unit. Move closer to the base unit, and try again.
While programming, the • A call is being received. Answer the call and start
handset starts to ring. again after hanging up.
Battery recharge
I fully charged the
battery, but
continues to flash, or
r--R, is displayed.
The handset display is
blank.
While charging, the
charge indicator does
not light and "Charge
for 7h" is displayed.
• Clean the charge contacts and charge again (page
11).
• The battery may need to be replaced with a new one
(page 10).
• Confirm that the battery is properly installed.
• Fully charge the battery (page 10).
• The battery is empty. The charge indicator does not
light in order to concentrate on charging. After about 5
minutes, the charge indicator lights and "Charging"
is displayed.
Making/answering calls, intercom
Static is heard, sound • Move the handset and base unit away from other
cuts in and out. electrical appliances.
Interference from other
electrical units.
The handset and base
unit do not ring.
I cannot make a call.
I cannot have a
conversation using the
headset.
• Move closer to the base unit.
• Turn on the clarity booster feature (page 18).
• If your unit is connected to a telephone line with DSL
service, we recommend connecting a noise filter
between the base unit and the telephone line jack.
Contact your DSL provider for details.
• The ringer volume is turned off. Adjust it (page !6,
28).
• The dialing mode may be set incorrectly. Change the
setting (page 14).
• The base unit or another handset is in use. Try again
later.
• Make sure that an optional headset is connected
properly (page 42).
• If _'SP-phone" iS displayed on the handset, press
[_'%] to switch to the headset.
For assistance, please visit http://www.panasonic.com!hetp 45