Filter
Top Products
Multi-unit Operation
Intercom
Intercom calls can be made:
- between handsets
- between the handset and base unit
Note:
• If you receive an outside call while
talking on the intercom, you hear 2
tones.
To answer the call with the handset,
press [OFF], then press [_%].
To answer the call with the base unit,
press [SP-PHONE] 2 times.
• You can locate a misplaced handset
by paging it (handset Iocator).
• When paging a unit for an intercom
call, the paged unit beeps for !
minute.
Making an intercom call
1 [INTERCOM]
2 [v]/[A]: Select the desired unit.
[Select]
• To stop paging, press [OFF].
3 When you finish talking, press
[OFF].
1 [LOCATOR/INTERCOM]
2 To page a specific handset, enter its
extension number ([1] - [4]).
To page all handsets, press [0] or
wait for a few seconds.
• To stop paging, press [LOCATOR/
INTERCOM].
3 When you finish talking, press
[SP-PHONE].
Answering an intercom call
1 Press [_%] or [<-] to answer the
page.
2 When you finish talking, press
[OFF].
1 Press [SP-PHONE] or [LOCATOR/
INTERCOM] to answer the page.
2 When you finish talking, press
[SP-PHONE].
Note for handset and base unit:
• When the ringer volume is set to off,
the handset orthe base unit rings at a
low level for intercom calls.
Transferring calls,
conference calls
Outside calls can be transferred
between the handset and base unit, or
between 2 handsets. The handset and
base unit, or 2 handsets can have a
conference call with an outside party.
1 During an outside call, press
[INTERCOM] to put the call on hold.
2 [v]/[A]: Select the desired unit.
[Transfer]
3 Wait for the paged party to answer.
• If the paged party does not answer,
press [_%] to return to the outside
call.
4 To complete the transfer:
Press [OFF].
• The outside call is being routed to
the unit.
38 For assistance, please visit http://www.panasonic.com!hetp