Filter
Top Products
Making/Answering Calls
Making calls
Using the handset
1 Dial the phone number.
eTo correct a digit, press [Clear].
2 Press [_%] or [Call].
3 When you finish talking, press [OFF]
or place the handset on the base unit
or charger.
Note:
• "Line in use" is displayed when
someone is talking on the unit or
another phone.
Using the speakerphone
1 Dial the phone number, and press
[<-].
• Speak alternately with the other
party.
2 When you finish talking, press
[OFF].
Note:
• Use the speakerphone in a quiet
environment.
• To switch to the receiver, press [_%].
Adjusting the receiver/speaker
volume
Press [A] or Iv] repeatedly while
talking.
Making a call using the redial list
The last 5 phone numbers dialed are
stored in the redial list (each 48 digits
max.).
1 [REDIAL]
2 [v]/[A]:Select the desired phone
number.
3 ["%]
Erasing a number in the redial list
1 [REDIAL]
2 [v]/[A]:Select the desired phone
number.
3 [Erase] _ [Yes] _ [OFF]
PAUSE button (for PBX/Iong
distance service users)
A pause is sometimes required when
making calls using a PBX or long
distance service. When storing a calling
card access number and/or PIN in the
phonebook, a pause is also needed
(page 21).
For example, if you need to dial the line
access number "9" when making
outside calls with a PBX:
1 [9] --_ [PAUSE] _ Dial the
phone number.
2 ["_]
Note:
• A 3.5 second pause is inserted each
time [PAUSE] is pressed. Press
repeatedly to insert longer pauses.
For assistance, please visit http://www.panasonic.com!hetp 15