Filter
Top Products
Intercom/Locator
29
3 Proceed with the desired operation.
■ To complete the transfer:
Press {SP-PHONE} or place the corded
handset on the cradle.
L The outside call is being routed to the
handset.
■ To establish a conference call:
Press {HOLD} .
L To leave the conference, place the corded
handset on the cradle. The other parties
can continue the conversation.
L To put the outside call on hold, press
{HOLD}. To resume the conference,
press {HOLD} again.
L You can cancel the conference call by
pressing {INTERCOM} to continue the
outside call.
Note:
L While you use the speakerphone, you cannot
make a conference call.
1 During an outside call, press {INTERCOM} to
put the call on hold.
L If voice paging is turned on (page 28), speak
into the microphone after the 2 rings.
2 Wait for the paged party to answer.
L If the paged party does not answer, press
{C} to return to the outside call.
3 Proceed with the desired operation.
■ To complete the transfer:
Press {i}.
L The outside call is being routed to the
destination unit.
■ To establish a conference call:
Press {INTERCOM}.
L To leave the conference, press {i}. The
other parties can continue the
conversation.
L To put the outside call on hold, press
{HOLD}. To resume the conference,
press {HOLD} again.
L You can cancel the conference call by
pressing {C} to continue the outside
call.
Answering a transferred call
Lift the corded handset or press {INTERCOM} to
answer the page.
Press {C} to answer the page.
Note for handset and base unit:
L After the paging party disconnects, you can talk
to the outside caller.
Handset locator
You can locate a misplaced handset by paging it.
1 Base unit:
Press {LOCATOR}.
2 To stop paging:
Base unit: Press {LOCATOR}.
Handset: Press {C}, then press {i}.
Note:
L When the ringer volume for outside calls is set to
off (page 15), the handset rings at a low level for
paging.
Y Handset
= Base unit
Y Handset
TG3651BX(e).book Page 29 Monday, May 31, 2010 8:51 AM