Filter
Top Products
Programming
23
Special instructions for
programmable settings
Setting the selective ring/call block
for specified phone number
(individual call setting) (Caller ID
subscribers only)
This feature allows you to select which unit rings
(Selective ring) or reject calls (Call block) for
specified phone numbers. You can store up to 10
phone numbers using the caller list or by entering
the numbers directly.
The following settings are available:
– “Call=Base” or “Call=HS1” (Selective ring):
You can select which unit rings when the unit
receives a call from a designated caller. Only the
selected base unit or handset rings and only its
user can answer the call.
– “Call block”: The unit rejects calls that you
do not want to answer such as junk calls. The
base unit and handset do not ring when the unit
receives a call from a designated caller.
Important:
L For call waiting service users:
When you receive a call while on the call, this
feature does not work.
Note:
L Depending on your service provider/telephone
company or PBX system, the base unit and
handset may both ring for a short time while
identifying a caller.
L The rejected call is logged as a missed call in
the caller list.
L The rejected caller is charged for the call.
Storing desired callers from the caller list
1 {>} CALLER ID
2 {V}/{^}: Select the desired entry. i I
3 Press {# } to select “Indiv. call”.
4 Edit the phone number if necessary (from 5
digits to 22 digits).
L The vacant entry number is selected
automatically.
5 I
6 {<}/{>}: Select the desired setting.
7 I i {i}
Storing desired callers by entering phone
number
1 ! i {#}{1}{3}{6}
2 {<}/{>}: “On” i I
3 {V}/{^}: Select the vacant entry number.
4 Enter the phone number (from 5 digits to 22
digits). i I
5 {<}/{>}: Select the desired setting.
6 I
L To add other entries, repeat from step 3.
7 {i}
Editing an entry
1 ! i {#}{1}{3}{6}
2 {<}/{>}: “On” i I
3 {V}/{^}: Select the desired entry.
4 Edit the phone number (from 5 digits to 22
digits). i I
5 {<}/{>}: Select the desired setting.
6 I i {i}
Erasing an entry
1 ! i {#}{1}{3}{6}
2 {<}/{>}: “On” i I
3 {V}/{^}: Select the desired entry.
4 Press and hold {CLEAR} to delete the
number.
5 I i {i}
Turning the individual call setting mode (the
selective ring/call block) off
1 ! i {#}{1}{3}{6}
2 {<}/{>}: “Off”
3 I i {i}
TG3651BX(e).book Page 23 Monday, May 31, 2010 8:51 AM