Filter
Top Products
One-Touch Dial
20
One-Touch Dial
The base unit has 5 one-touch dial buttons. You
can make calls without having to dial manually by
pressing the buttons.
Assigning a phone number to an one-touch
dial button
Important:
L Before storing phone numbers, make sure the
base unit is not being used.
1 Press and hold the one-touch dial button for 3
seconds.
2 Enter the phone number (24 digits max.).
3 Press the same button.
Making a call using the one-touch dial button
Lift the corded handset, then press the desired
one-touch dial button.
OR
Press the desired one-touch dial button to use the
speakerphone.
Canceling an one-touch dial assignment
1 Press and hold the desired one-touch dial
button for 3 seconds.
2 Press and hold {CLEAR} to erase all
numbers.
3 Press the same button.
Note:
L If you can not erase the all numbers in step 2:
Press {<} to flash the first number, then press
and hold {CLEAR}.
Index card
Use the index card to record the names/phone
numbers stored to the one-touch dial buttons.
= Base unit
Cover
Index card
TG3651BX(e).book Page 20 Monday, May 31, 2010 8:51 AM