Filter
Top Products
Making/Answering Calls
15
Pause (for PBX/long distance service
users)
A pause is sometimes required when making calls
using a PBX or long distance service. When
storing a calling card access number and/or PIN in
the phonebook, a pause is also needed (page 19).
Example: If you need to dial the line access
number “9” when making outside calls with a PBX:
1 Proceed with the operation for your unit.
Base unit: {9} i {PAUSE}
Handset: {9} i l
2 Dial the phone number.
3 Proceed with the operation for your unit.
Base unit: Lift the corded handset.
Handset: {C}
Note:
L A 3.5 second pause is inserted each time
{PAUSE} on the base unit or l on the
handset is pressed. Repeat as needed to create
longer pauses.
Answering calls
Using the base unit =
1
Lift the corded handset or press {SP-PHONE}
when the unit rings.
2 When you finish talking, place the corded
handset on the cradle. When the
speakerphone is used, press {SP-PHONE}.
Adjusting the base unit ringer volume
Press {^} or {V} repeatedly to select the desired
volume.
To turn the ringer off, press and hold {V} until the
base unit beeps 2 times.
L ~ is displayed.
Changing the base unit ringer tone
Press {<} or {>} repeatedly to select the desired
ringer tone.
L To stop ringing, press {EXIT}.
Note:
L If you select one of the melody ringer tones, the
ringer tone will continue to play for several
seconds even if the caller has already hung up.
You may either hear a dial tone or no one on the
line when you answer the call.
Using the handset Y
1
Lift the handset and press {C} or {s} when
the unit rings.
L You can also answer the call by pressing
any dial key from {0} to {9}, {* }, or {#}.
(Any key answer feature)
2 When you finish talking, press {i} or place
the handset on the charger.
Auto talk
You can answer calls simply by lifting the handset
off the charger. You do not need to press {C}. To
turn this feature on, see page 22.
Adjusting the handset ringer volume
Press {^} or {V} repeatedly to select the desired
volume.
“Step tone”: The ringer volume increase by a
level from low to high when a call is receiving.
To turn the ringer off, press and hold {V} until the
handset beeps 2 times.
Changing the handset ringer tone
1 ! i {#}{0}{5}{4}
L You can also program by pressing #.
2 {<}/{>}: Select “Tone” or “Melody”. i
M
3 To select the desired tone, press {1} to {5}.
To select the desired melody, press {1} to {4}.
L You can also select the setting by pressing
{<} or {>}.
4 I i {i}
Note:
L The preset melodies in this product are used
with permission of © 2006 Copyrights Vision Inc.
L If you select one of the melody ringer tones, the
ringer tone will continue to play for several
seconds even if the caller has already hung up.
You may either hear a dial tone or no one on the
line when you answer the call.
= Base unit / Y Handset
TG3651BX(e).book Page 15 Monday, May 31, 2010 8:51 AM