Filter
Top Products
77
Troubleshooting
Useful Information
General
When you play back messages
or turn on the Answering
System, the handset and/or
base unit announces the wrong
day and time.
• The date and time may be set incorrectly.
Set the date and time again (p. 14).
Problem Cause & Remedy
The handset and/or base unit
does not work.
• Check the settings (p. 9–11).
• Check whether the dialing mode setting is
correct (p. 15).
• Fully charge the battery (p. 10).
• Clean the charge contacts and charge again
(p. 11).
• Check battery installation (p. 10).
• Unplug the base unit’s AC adaptor to reset
it. Plug in, and try again.
• Re-install the battery (p. 10) and fully charge
it.
Time setting is erased, and “E”
flashes on the base unit
display or “
E
Press MENU.”
flashes on the handset display.
• If a power failure occurs, time setting may
be erased. Set the date and time again
(p. 14).
“Recharge battery” is
displayed, “7” flashes, or
the handset beeps
intermittently.
• Fully charge the battery (p. 10).
“Charge for 6h” and “8”
are displayed and the handset
does not work.
• The battery has been discharged. Fully
charge the battery (p. 10).
• Check battery installation (p. 10).
You charged the battery fully,
but “Recharge battery” is
still displayed and/or “7”
continues to flash, or “Charge
for 6h” and “8” are
displayed.
• Clean the charge contacts and charge again
(p. 11).
• The battery may need to be replaced. If you
install a new battery, fully charge it (p. 10).
The CHARGE indicator does
not go out after the battery has
been charged.
• This is normal.
Problem Cause & Remedy